How to cut video to the beat.
The short version: find the song's tempo, turn it into frames, and cut on bar lines rather than single beats. Once you know a beat lasts 15 frames, you stop nudging clips by eye and every cut lands. Here's the maths, a table so you don't have to do it, and how to get the exact beat times for any track for free.
Step 1: get the tempo
Drop the track into everysong and the readout gives you its BPM and key, along with 12 other traits, plus a Cut points panel with the whole beat grid. It's free and there's no account. Vera, the engine underneath, gets the tempo spot on about four times in five on songs it has never heard. When it's off, it's nearly always by exactly half or double (it hears a 140 BPM track as 70), and that's easy to spot because your cuts will land on every other beat.
Quick sanity check: tap along to the chorus for 15 seconds and count. Multiply by four. If you land near the readout's number, or exactly half or double it, you're good.
Step 2: turn BPM into frames
One beat lasts 60 ÷ BPM seconds. Multiply by your frame rate to get frames per beat. A bar in 4/4 is four beats.
| BPM | One beat | Frames @24 | Frames @25 | Frames @30 | One bar (4/4) |
|---|---|---|---|---|---|
| 70 | 0.857s | 20.6 | 21.4 | 25.7 | 3.43s |
| 80 | 0.750s | 18.0 | 18.8 | 22.5 | 3.00s |
| 90 | 0.667s | 16.0 | 16.7 | 20.0 | 2.67s |
| 100 | 0.600s | 14.4 | 15.0 | 18.0 | 2.40s |
| 110 | 0.545s | 13.1 | 13.6 | 16.4 | 2.18s |
| 120 | 0.500s | 12.0 | 12.5 | 15.0 | 2.00s |
| 128 | 0.469s | 11.2 | 11.7 | 14.1 | 1.88s |
| 140 | 0.429s | 10.3 | 10.7 | 12.9 | 1.71s |
| 160 | 0.375s | 9.0 | 9.4 | 11.2 | 1.50s |
| 174 | 0.345s | 8.3 | 8.6 | 10.3 | 1.38s |
When frames per beat isn't a whole number (128 BPM at 25fps is 11.7), don't round every cut. Round each cut point from the start of the song instead, or the error stacks up and you drift off the beat by the end of the edit.
Step 3: cut on bars, not beats
- Bars for scene changes. A cut on the first beat of a bar feels deliberate. A cut on beat three feels like a mistake, even to people who couldn't tell you why.
- Beats for fast montage. Inside a high-energy section, every beat or every other beat works.
- Section changes for the big moments. The drop, the chorus, the key change. Save your strongest shot for these.
- Slow songs, longer holds. At 70 BPM a bar is nearly three and a half seconds. Cutting on every beat will feel frantic.
Step 4: get the exact beat times
The table assumes the tempo never moves. Live drummers, rubato intros and tracks that speed up don't play along. For those, use the actual beat grid. Every everysong readout now has a Cut points panel: frames per beat at 24, 25 and 30fps, when each bar starts, suggested section changes, and a CSV of every beat for up to six minutes of the song. Copy the bar times or download the CSV and drop markers where they land. Building an auto-edit tool? The same grid comes from the free Vera API (25 calls a day), and the API docs show the call.
Cutting to a song you can't actually use
Plenty of edits get cut to a temp track, often a chart song, and then the music has to change before it goes out. If the replacement has a different tempo, every cut you timed is now wrong. That's the problem everysong was built for: drop the temp track in and it finds Creative-Commons tracks that sound like it, and shows each match's BPM and key, so you can pick one your cuts will survive. More on that in how to replace a song in your video without re-cutting it.
Questions people ask
How do I find the BPM of a song?
Upload it to everysong and the readout shows the BPM, the key and 12 other traits. It's free with no account. You can also tap along to the chorus for 15 seconds and multiply the count by four to check it.
How many frames is one beat?
Frames per beat is 60 divided by the BPM, times your frame rate. At 120 BPM and 25fps that's 12.5 frames. The table on this page covers common tempos at 24, 25 and 30fps.
Should I cut on every beat?
Usually not. Cut on the first beat of a bar for scene changes and save every-beat cutting for fast montage sections. On slow songs, every-beat cuts feel frantic.
Why do my cuts drift off the beat?
Either you rounded frames per beat and the error built up, or the song's tempo isn't steady. Round each cut from the start of the song, and for live or variable-tempo tracks use the actual beat times from the readout's Cut points panel.
Is the beat grid tool free?
Yes. The BPM and the full beat grid (bars, sections and a CSV of every beat) are in the free web readout, no account. Developers can get the same grid from the Vera API with a free key, 25 calls a day. Nothing is for sale.
See also
- How to replace a song in your video without re-cutting it: swap the temp track and keep your edit.
- Free music for video editing: where the safe tracks come from.
- The 13 audio traits, explained: what BPM, key, energy and the rest actually tell you.